Description

Replacement nanofiber perfection P3 filter for NANOLOGIX RESPIRA COMPACT half mask and CM6 mask.

• Easy and intuitive filter replacement without the need to remove the mask from the face
• Solution without the use of an exhalation valve
• Effective mechanical capture of particles
• Possibility of long-term use
• Low breathing resistance
• The pressure of the exhaled air regenerates the filter insert and extends its service life
• Flexibility in the final application of the used nanotextile filter insert
• Functionality comparable to existing competitive half mask design solutions
• Does not contain latex, silicone, hypoallergenic and non-irritating
• Filter lifetime approx. 30 days
• possibility of sterilizing the filter up to 5 times, either by immersion in a 60% alcohol solution or at a temperature of 80°C for 20 minutes or by ozone or UV
• nanofilters capture particles with a size of 50 nanometers and the smallest viruses of 200 nanometers
• thanks to the nanofilter material used and one inhalation and exhalation valve, the life of the filter is approximately 4x longer than that of conventional filter materials for half masks and full face masks
• weight: 40g
• standard: EN 143:2000 + A1:2006

Its unique design combines inhalation and exhalation valves and the self-cleaning function extends its life, making it unique. The round shape of the filter makes handling easier (the filter can be changed with one hand without having to remove the mask from the face). The cheekpiece is not part of the filter.

CERTIFICATION:

Replaceable filter: ČSN EN 143:2001, Amendment A1:2006 Respiratory protective equipment.
Particle filters. Requirements, testing, marking (idt. EN 143:2000, EN 143:2000/A1:2006)

FILTER LIFETIME: about 30 days or more, depending on the length of use and the environment. If breathing becomes difficult, the filter must be replaced.

Filter disinfection: UV radiation, ozone, immersion in an alcohol disinfection bath, spraying, disinfection solution or heat up to 80 degrees Celsius. We recommend a maximum of approx. 10 disinfection cycles.

WARNING: The filter material must be completely dried before further use. It contains an exhalation valve, we recommend using it in combination with the protective cover of the P3 filter.
Link: www.nanologix.eu
The Nanologix Respira system was developed in Czech laboratories in cooperation with the Technical University of Liberec. It is currently used by the Army of the Czech Republic, scientific and medical facilities and components of the integrated rescue system. Made in Czech Republic.