3NanoMasks

The half mask itself is made of durable, long-lasting medical grade silicone, so it can be disinfected and sterilized without damage. For routine maintenance, we recommend sterilizing the half mask with alcohol-based cleaning agents. Replaceable filters can only be sterilized by special procedures – UV radiation, ozone, immersion in an alcohol disinfection bath or spraying, but the filter material must be completely dried before further use. The half mask and filters can also be heat sterilized (up to 80°C). However, unprofessional sterilization can damage the nanofibrous material and reduce its effectiveness, therefore sterilization of filters in domestic conditions is not recommended and cannot be guaranteed.

Filter life varies individually depending on the type and level of pollution of the environment in which the half mask is used. In a moderately polluted environment, the filter can be used repeatedly for up to 30 days if hygienic handling is followed, and the user usually recognizes this moment by the fact that it is already difficult to breathe in the mask. Conversely, in a dangerous environment (contact with viruses or substances dangerous to humans), we recommend changing the filter at least once a day as a precaution. In heavy industry, the declared lifetime of the filter is 1 work shift, for doctors and emergency services it is 1 work shift, possibly until the moment of contamination.

The Nanologix half mask was designed for professional use and is therefore intended for adults. Not suitable for children and probably won’t seal well enough.
– Does the Nanologix Respira half mask protect against coronaviruses? Yes, when used in combination with the appropriate replacement filters. The filters of the Nano Perfection P2 series guarantee 99% capture, and thanks to the special design without an exhalation valve, the user and his surroundings are protected (it is not necessary to wear a facepiece over the respirator). Perfection P3 series filters provide up to 99.99% capture and guarantee reliable protection even in risky environments, e.g. when in contact with an infectious person.

Yes, when used in combination with the appropriate replacement filters. The filters of the Nano Perfection P2 series guarantee a 99% capture rate and thanks to a special design without an exhalation valve, the user and his surroundings are protected (it is not necessary to wear a face shield over the respirator). Perfection P3 series filters provide up to 99.99% capture and guarantee reliable protection even in risky environments, e.g. when in contact with an infectious person.

In combination with the Nano Perfection P2 filter, this is not necessary. Thanks to the special design of the filter without an exhalation valve, the exhaled air is also filtered. When using the Perfection P3 filter, we recommend using a special cotton cover from our offer, as this type of filter has an exhalation valve.

Yes, the half mask is designed for professional use by safety and rescue forces, so it can be combined with all the usual pieces of safety equipment. For maximum comfort and efficiency, we recommend compatible glasses and shields from our offer.